Australia EMC Standards List,EMC Test Report compliance ACMA regulation standards,RCM Standards -Shenzhen LCS Compliance Testing Laboratory Ltd._

Home > Products > Lighting Fixture > Industrial Lighting >High Bay Lights

Australia EMC Standards List,EMC Test Report compliance ACMA regulation standards,RCM Standards

MOQ ：1 set

Lead Time ：10 Days

Inquiry Start Order

Seller Support : Trade Authenticity Guaranteed & Accepting

Payment : Other

Departure Port : Shenzhen

Product details

Supply Ability

Supply Ability：1000 piecesWarranty(Year)：1 Year

Product Specifications

Brand name：Australia EMC Standa

Product Description

The Australian Communications and Media Authority (ACMA) incorporates the listed standard(s) as mandatory standards under section 162 of the Radiocommunications Act 1992 as part of the ACMA's Electromagnetic Compatibility (EMC) Regulatory Arrangement.

Suppliers must select an appropriate standard in column 2 of Part 2 of the table below as an applicable standard for a device. If none of the standards listed in Part 2 apply to a device then a generic standard form column 2 of Part 1 becomes the applicable standard for that device. The ACMA only mandates performance requirements in relation to emissions therefore compliance to standards within this list is only required to the extent that matters within the standard that relate to interference to: (a) radiocommunications; and, (b) any uses or functions of devices.

It is important to note that:

· The expiry date listed in Column 9 of the standard refers to the expiry of the replaced standard listed in Column 8 of the table.

· The applicable standard listed in column 2 is modified by any relevant notes listed in Column 10 of the table.

· Expired standards are listed in a separate document. These standards are not applicable standards for new equipment and are included in the attached document for information only.

· The expiry date listed against the standard in Column 9 indicates the day after the last day that the standard could be used for compliance of new equipment.

· In this version of the table some original columns have been removed as the information was not pertinent. Original column numbers have been retained to align the table with the Radiocommunications (Electromagnetic Compatibility) Standard 2008 .

· *For any standard listed with an AC, the ACMA will accept the test report with or without the AC as these are editorial changes

Part 1 Generic standards
1	2	3	4	7	8	9	10
Item No.	Applicable Standard	Full Title of Standard	Publication Date	Brief description of equipment type	Standard being replaced	Expiry Date of replaced standard	Remarks
G1	AS/NZS 61000.6.3: 2012	Electromagnetic compatibility (EMC) – Part 6.3: Generic standards – Emission standard for residential, commercial and light-industrial environments	30/04/2012	Equipment intended for use in a residential, commercial, or light industrial environment that is not covered by one of the product family standards	AS/NZS 61000.6.3: 2007	14/10/2015	Harmonics and flicker not required
	AS/NZS 61000.6.3: 2007		31/05/2007		AS/NZS 4251.1:1999	31/05/2009
	EN 61000-6-3:2007 /A1:2011		2007		EN 61000-6-3: 2007	12/01/2014
	EN 61000-6-3:2007 /A1:2011/AC:2012 (new)		22/07/2014
	IEC 61000-6-3:2011 (Ed 2.1)		17/02/2011		IEC 61000-6-3:2006	14/10/2014
	IEC 61000-6-3:2006		17/07/2006		IEC 61000-6-3:1996	17/07/2008
G2	AS/NZS 61000.6.4: 2012	Electromagnetic compatibility (EMC) – Part 6.4: Generic standards – Emission standard for industrial environments	09/05/2012	All equipment intended for use in an industrial environment that is not covered by one of the product family standards	AS/NZS 61000.6.4: 2007	14/10/2014	Harmonics and Flicker not required
	AS/NZS 61000.6.4: 2007		31/05/2007		AS/NZS 4251.2:1999	31/05/2009
	EN 61000-6-4:2007 /A1:2011 (Ed 2.1)
	IEC 61000-6-4:2011 (Ed 2.1)		23/02/2011		IEC 61000-6-4:2006	14/10/2014
	IEC 61000-6-4:2006		10/07/2006		IEC 61000-6-4:1997	10/07/2008

Part 2 – Product Family and Equipment Standards
1	2	3	4	7	8	9	10
Serial	Applicable Standard	Title of Standard	Publication Date	Brief description of equipment to which standard should apply	Standard being replaced	Expiry Date of replaced standard	Remarks
1	EN 50083-2:2012	Cabled networks for television signals and interactive services - Part 2: Electromagnetic Compatibility for Equipment		Cable networks for television signals, sound signals and interactive services	EN 50083-2:2006	21/06/2013
2	IEC 60728-2:2002	Cabled distribution systems for television and sound signals- Part 2: Electromagnetic Compatibility for Equipment	22/10/2002	Cabled distribution systems for television and sound signals
3	AS/NZS CISPR 11:2011	Industrial scientific and medical (ISM) radio-frequency equipment – Electromagnetic disturbance characteristics – Limits and methods of measurement	30/11/2010 (AU) 10/12/2010 (NZ)	Industrial scientific and medical (ISM) radio-frequency equipment	AS/NZS CISPR 11:2004 Ed 2	17/11/2013 21/12/2007	The 900 ISM band for Australia is 915-928 MHz, not 902-928 MHz as shown in the standard. 900 MHz ISM devices operating outside 915-928 MHz cannot be used in Australia.
	CISPR 11:2010 (CISPR 11:2009 + A1(2010) Edition 5.1 )		19/05/2010		CISPR 11:2003 + A1 (2004) + A2 (2006)	17/11/2013
	EN 55011:2009 +A1:2010				EN55011:2009	01/07/2013
4	AS/NZS CISPR 12:2013	Vehicles, boats and internal combustion engine driven devices – Radio disturbance characteristics – Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices	20/06/2013	Land based vehicles (including electric powered vehicles), boats and devices with internal combustion engines	AS/NZS CISPR 12:2009	20/06/2015
	AS/NZS CISPR 12:2009		22/06/2009		AS/NZS CISPR 12:2006	04/10/2012
	EN 55012:2007/A1:2009				EN 55012:2007	01/07/2012
	CISPR 12:2009 (Ed 6.1)		10/03/2009		CISPR12:2007	14/10/2014
	CISPR 12:2007		23/05/2007		CISPR 12:2001	23/05/2009
5	AS/NZS CISPR 13:2012	Sound and television broadcast receivers and associated equipment – Radio disturbance characteristics – Limits and methods of measurement	27/06/2012	Sound and television broadcast receivers, set top boxes, radio receivers, satellite receivers, analog and digital, DVD players, Video recorders, CD players, audio amplifiers, surround sound equipment	AS/NZS CISPR 13:2004	27/06/2014	AS/NZS CISPR 13:2004 to expire 27/06/2014 Note: see serial 8A below
	EN 55013:2001 /A2:2006				EN 55013:2001 + A1:2003	01/03/2009
	EN 55013:2013 (new)		22/07/2014		EN 55013:2001 and its amendments	22/07/2016
	CISPR 13:2009 (Ed 5)		29/06/2009		CISPR 13:2006	14/10/2014
	CISPR 13:2006 (Consol. CISPR 13:2001 +A1 (2003) + A2 (2006))		2001		CISPR 13	21/12/2007
6	AS/NZS CISPR 14.1:2013	Electromagnetic Compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 1: Emissions	20/06/2013	Household appliances, power tools, battery operated tools, electric and electronic toys, heating appliances, kitchen machines, motor operated appliances	AS/NZS CISPR 14.1:2010	24/06/2015	AS/NZS CISPR 14.1:2010 will expire 24/06/2015 EN 55014-1:2006/ A1:2009 will expire 16/08/2014
	AS/NZS CISPR 14.1:2010		03/03/2010		AS/NZS CISPR 14.1:2003	04/10/2012
	EN 55014-1:2006/ A2:2011		2006		EN 55014-1:2006 + A1:2009	16/08/2014
	EN 55014-1:2006/ A1:2009		2006		EN 55014-1:2006	01/05/2012
	CISPR 14-1:2009 (Consol. Ed of CISPR 14-1:2005 + A1 (2008))		11/02/2009 (11/11/2005)		CISPR 14-1:2000 + A1 (2001) + A2 (2002)	21/12/2007
7	AS/NZS CISPR 15:2011	Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment	20/12/2011	Lighting equipment, lighting accessories such as ballasts, transformers, dimmers	AS/NZS CISPR 15:2006	09/02/2013	Testing above 30 MHz mandatory from 9 Feb 2013
	EN 55015:2006/A2:2009				EN 55015:2006 /A2:2007	01/03/2012
	EN 55015:2013 (new)		22/07/2014		EN 55015:2006 and its amendments	22/07/2016
	CISPR 15:2009 (Consolidated edition of CISPR 15:2005 + A1 (2006) + A2(2008))		12/01/2009 (2005)		CISPR 15:2000	21/12/2007
8	AS/NZS CISPR 22:2009 + A1 (2010)	Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement	01/12/2010	Information technology equipment, modems, fax machines, BPL modems	AS/NZS CISPR 22:2009	04/10/2012	Testing radiated emissions above 1 GHz from 1/10/2011. Compliance for equipment to CISPR 22 can be met through compliance with CISPR 32 (see 8A below)
	EN 55022:2010 + *AC:2011		2010		EN 55022:2006 and its amendments	01/12/2013
	CISPR 22:2005 + A1 (2005) + A2 (2006)		04/2005		CISPR 22: 2003	21/12/2007
	CISPR 22: 2008		24/09/2008		CISPR 22:2006	24/09/2010
8A	AS/NZS CISPR 32:2013	Electromagnetic compatibility of multimedia equipment - Emission requirements	20 Jun 2013	Information technology equipment, modems, fax machines, BPL modems Sound and television broadcast receivers, set top boxes, radio receivers, satellite receivers, analog and digital, DVD players, Video recorders, CD players, audio amplifiers, surround sound equipment Multimedia equipment intended primarily for professional use	CISPR 13 CISPR 22	T.B.A Expiry dates for declaring compliance against CISPR 13 and CISPR 22 is not yet determined but is not expected to be before mid 2017.	CISPR 32 is a newly introduced standard that will, over time, replace CISPR 13 and CISPR 22.
	EN 55032:2012		22 July 2014		EN 55013:2013 + EN 55022:2010 + EN 55103-1:2009 and its amendment
	CISPR 32 Ed 1.0		30 Jan 2012
9	EN 60974-10:2007	Arc welding equipment – Part 10: Electromagnetic compatibility (EMC) requirements	2007	Arc welding equipment	EN 60974-10:2003	01/12/2010
9	IEC 60974-10:2007		29/08/2007	Arc welding equipment	IEC 60974-10:2004	29/08/2009
10	EN 50065-1:2011	Specification for signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. General requirements, frequency bands and electromagnetic disturbances		Signalling on low-voltage electrical installations	EN 50065-1:2001/A1:2010	21/03/2014
11	IEC 61000-3-8:1997	Electromagnetic compatibility (EMC) - Part 3: Limits - Section 8: Signalling on low-voltage electrical installations - Emission levels, frequency bands and electromagnetic disturbance levels	26/09/1997	Signalling on low-voltage electrical installations
12	AS 62040.2:2008	Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements	19/03/2008	Uninterruptible power systems (UPS)	AS 62040.2 :2001	19/03/2010	Immunity, harmonics and flicker not required
	EN 62040-2:2006 + AC:2006		2006		EN 50091-2:1995	01/10/2008
	IEC 62040-2:2005		10/2005		IEC 62040-2:1999	21/12/2007
13	EN 50148:1995	Electronic taximeters	1995	Electronic taximeters	Relevant generic standards	15/12/1995
14	EN 50263:1999	Electromagnetic compatibility (EMC). Product standard for measuring relays and protection equipment	1999	Measuring relays and protection equipment	Relevant generic standards	01/08/2002
15	EN 50270:2006	Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen	2006	Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen	EN 50270:1999	01/06/2009
16	EN 55103-1:2009	Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emission		Professional audio / video equipment	EN 55103-1:1996	01/07/2012	See 8A above.
16	EN 55103-1:2009/A1:2012		22/07/2014	Professional audio / video equipment	EN 55103-1:2009	22/07/2016	See 8A above.
17	EN 60204-31:1998 +*AC:2000	Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems	1998	Sewing Machines designed specifically for professional use in the sewing industry	Relevant generic standards	01/06/2002
17	IEC 60204-31:2001		10/12/2001		IEC 60204-31:1996	21/12/2007
18	EN 60439-1:1999	Low-voltage switchgear and control gear assemblies - Part 1: Type-tested and partially type-tested assemblies	1999	Low-voltage switch gear and control gear assemblies	EN 60439-1:1994 + A11:1996	01/08/2002	EN 60439-1:1999 will expire 01/11/2014 EN 60439-1:2009 will expire 01/11/2014
	EN 61439-1:2009				EN 60439-1:1999	01/11/2014
	EN 61439-1:2011				EN 61439-1:2009	23/09/2014
	IEC 61439-1:2009	Low-voltage switchgear and control gear assemblies - Part 1: General rules	22/01/2009		IEC 60439-1:2004	22/01/2011
19	EN 60669-2-1:2004 /A12:2010	Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches		Electronic switches for household and similar use	EN 60669-2-1:2004 + A1:2009	01/06/2013
19	IEC 60669-2-1:2009		28/01/2009	Electronic switches for household and similar use	IEC 60669-2-1:2002	28/01/2011
20	EN 60669-2-2:1997	Switches for household and similar fixed electrical installations - Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS)	1997	Electromagnetic remote-control switches (RCS) for household and similar use
20	IEC 60669-2-2:2006		29/08/2006		IEC 60669-2-2:1996	29/08/2008
21	EN 60669-2-3:1997	Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time-delay switches (TDS)	1997	Time-delay switches (TDS) for household and similar use
21	IEC 60669-2-3:2006		29/08/2006	Time-delay switches (TDS) for household and similar use	IEC 60669-2-3:1997	29/08/2008
22	EN 62053-22:2003	Electricity metering equipment (a.c.) - Particular requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)	2003	Static meters for active energy (classes 0,2 S and 0,5 S)	EN 60687:1992	01/03/2006
22	IEC 62053-22:2003		28/01/2003	Static meters for active energy (classes 0,2 S and 0,5 S)	IEC 60687:1992	21/12/2007
23	EN 60730-1:2011	Automatic electrical controls for household and similar use - Part 1: General requirements -		Automatic electrical controls for household and similar use	EN 60730-1:2000 and its amendments	01/10/2013
23	IEC 60730-1:2007 (Consolidated edition of IEC 60730-1:1999 +A1 (2003) +A2 (2007))		28/03/2007 (1999)	Automatic electrical controls for household and similar use
24	EN 60730-2-5:2002 /A2:2010	Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems		Automatic electrical burner control systems for household and similar use	EN 60730-2-5:2002 /A11:2005	01/03/2013
24	IEC 60730-2-5:2009 (Cons. Ed IEC 60730-2-5:2000 + A1:2004 +A2:2008)		25/02/2009 (2000)
25	EN 60730-2-6:2008	Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements		Automatic electrical pressure sensing controls for household and similar use	EN 60730-2-6:1995 + A1:1997	01/07/2011
25	IEC 60730-2-6:2007		15/02/2007		IEC 60730-2-6:1991	15/02/2009
26	EN 60730-2-7:2010	Automatic electrical controls for household and similar use. Part 2: Particular requirements for timers and time switches		Timers and time switches for household and similar use	EN 60730-2-7:1991 and its amendment	01/10/2013
26	IEC 60730-2-7:2008		14/04/2008	Timers and time switches for household and similar use	IEC 60730-2-7:1990 +A1 (1994)	14/04/2010
27	EN 60730-2-8:2002 /A1:2003	Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements		Electrically operated water valves for household and similar use	EN 60730-2-8:2002	01/12/2008
27	IEC 60730-2-8:2003 (Cons. Ed. IEC 60730-2-8:2000 + A1:2002)		30/01/2003
28	EN 60730-2-9:2010	Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls		Temperature sensing controls for household and similar use	EN 60730-2-9:2002 and its amendments	01/11/2013
28	IEC 60730-2-9:2008		25/06/2008	Temperature sensing controls for household and similar use	IEC 60730-2-9:2000 with amendments 1 (2002) and 2 (2004)	25/06/2010
29	EN 60730-2-11:1993 + A1:1997 + A11:2005	Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators	1993	Energy regulators for household and similar use
29	IEC 60730-2-11:2006		11/10/2006	Energy regulators for household and similar use	IEC 60730-2-11:1993	11/10/2008
30	EN 60730-2-13:1998 + A11:2005	Automatic electrical controls for household and similar use - Part 2-13: Particular requirements for humidity sensing controls	1998	Humidity sensing controls for household and similar use
30	IEC 60730-2-13:2006		11/10/2006	Humidity sensing controls for household and similar use	IEC 60730-2-13:1995	11/10/2008
31	EN 60730-2-14:1997 /A1:2001	Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators		Electric actuators for household and similar use	EN 60730-2-14:1997	01/07/2008
31	IEC 60730-2-14:2008 (Consol. Ed. IEC 60730-2-14:1995 +A1 (2001)+ A2 (2007))		14/04/2008	Electric actuators for household and similar use	IEC 60730-2-13:1995	11/10/2008
32	IEC 60730-2-15:2008	Automatic electrical controls for household and similar use - Part 2: Particular requirements for automatic electrical water and air flow sensing controls	30/01/2008	Automatic electrical water and air flow sensing controls for household and similar use	IEC 60730-2-18:1997	30/01/2010
32	EN 60730-2-18:1999		1999		EN 60730-1:1995 and its amendments	01/04/2002
33	EN 60870-2-1:1996	Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility	1996	Telecontrol equipment and systems	Relevant generic standards	01/09/1996
33	IEC 60870-2-1:1995		08/12/1995	Telecontrol equipment and systems
34	EN 60945: 2002	Maritime navigation and radio-communication equipment and systems - General requirements - Methods of testing and required test results	2002	Maritime navigation and radio-communication equipment and systems	EN 60945:1997	01/10/2005
34	IEC 60945:2002		2002
35	EN 60947-1:2007/A1:2011	Low-voltage switch gear and control gear - Part 1: General rules		Low voltage switch gear and control gear	EN 60947-1:2007	01/01/2014
35	IEC 60947-1:2007		06/06/2007	Low voltage switch gear and control gear	IEC 60947-1:2004	01/07/2010
36	EN 60947-2:2006 /A1:2009	Low-voltage switchgear and control gear - Part 2: Circuit-breakers		Circuit breakers	EN 60947-2:2006	01/07/2012
36	IEC 60947-2:2006		22/05/2006	Circuit breakers	IEC 60947-2:2003	22/05/2008
37	EN 60947-3:2009	Low-voltage switch gear and control gear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units		Switches, disconnectors, switch-disconnectors and fuse-combination units	EN 60947-3:1999 + A1:2001	01/05/2012	EN 60947-3:2009 will expire 21/03/2015
	EN 60947-3:2009 /A1:2012				EN 60947-3:2009	21/03/2015
	IEC 60947-3:2008		28/08/2008		IEC 60947-3:1999 + A1(2001) + A2(2005)	28/08/2010
38	EN 60947-4-1:2010	Low-voltage switch gear and control gear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters		Contactors and motor-starters - Electro-mechanical contactors and motor-starters	EN 60947-4-1:2001 and its amendments	01/04/2013
38	IEC 60947-4-1:2002 + A2(2005) (Cons. Ed. IEC 60947-4-1:2000 + A1(2002) + A2 (2005))		17/12/2002
39	EN 60947-4-2:2000/ A2:2006	Low-voltage switch gear and control gear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters		Contactors and motor-starters - AC semiconductor motor controllers and starters	EN 60947-4-2:2000 + A1:2002	01/12/2009
39	IEC 60947-4-2:2007 (Cons. Ed. IEC 60947-4-2:1999 + A1(2001) + A2 (2006))		16/02/2007
40	EN 60947-4-3:2000 /A1:2006	Low-voltage switch gear and control gear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads		Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads	EN 60947-4-3:2000	01/11/2009	EN 60947-4-3:2000 /A1:2006 will expire 18/04/2014
	EN 60947-4-:2000 /A2:2011				EN 60947-4-3:2000 /A1:2006	18/04/2014
	IEC 60947-4-3:2007 (Cons. Ed. IEC 60947-4-3:1999 + A1(2006))		30/01/2007
41	EN 60947-5-1:2004/A1:2009	Low-voltage switch gear and control gear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices		Control circuit devices and switching elements - Electro-mechanical control circuit devices	EN 60947-5-1:2004	01/05/2012
41	IEC 60947-5-1:2003		12/11/2003
42	EN 60947-5-2:2007	Low-voltage switch gear and control gear - Part 5-2: Control circuit devices and switching elements - Proximity switches	2007	Control circuit devices and switching elements - Proximity switches	EN 60947-5-2:1998 + A2:2004	01/11/2010
42	IEC 60947-5-2:2007		09/10/2007		IEC 60947-5-2:1997 + A1 (1999) + A2(2003)	09/10/2009
43	EN 60947-5-3:1999 /A1:2005	Low-voltage switch gear and control gear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF)		Proximity devices with defined behaviour under fault conditions	EN 60947-5-3:1999	01/03/2008
43	IEC 60947-5-3:2005 (Cons. Ed IEC 60947-5-3:1999 +A1 (2005))		16/04/2005
44	EN 60947-5-6:2000	Low-voltage switch gear and control gear - Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR)	2000	DC interface for proximity sensors and switching amplifiers (NAMUR)	EN 50227:1997	01/01/2003
44	IEC 60947-5-6:1999		17/12/1999
45	EN 60947-6-1:2005	Low-voltage switch gear and control gear - Part 6-1: Multiple function equipment - Transfer switching equipment	2005	Multiple function equipment - Transfer switching equipment	EN 60947-6-1: 1991 +A2:1997	01/10/2008
45	IEC 60947-6-1:2005		31/08/2005	Multiple function equipment - Transfer switching equipment	IEC 60947-6-1:1989	31/08/2007
46	EN 60947-6-2:2003 /A1:2007	Low-voltage switch gear and control gear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)		Multiple function equipment - Control and protective switching devices (or equipment) (CPS)	EN 60947-6-2:2003	01/03/2010
46	IEC 60947-6-2:2007 (Cons. Ed. IEC 60947-6-2:2002 + A1 (2007))		30/03/2007
47	EN 61008-1:2004/A12:2009	Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules		Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs)	EN 61008-1:2004	01/12/2011
47	IEC 61008-1:2006 (Cons Ed. IEC 61008-1:1996 + A1 (2002) +A2 (2006))		23/06/2006
48	EN 62053-21:2003	Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2)	2003	Static meters for active energy (classes 1 and 2)	EN 60136:1996 +A1:2000	01/03/2006
48	IEC 62053-21:2003		2003	Static meters for active energy (classes 1 and 2)
49	EN 62054-11:2004	Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers	2004	Electronic ripple control receivers	EN 61037:1992 +A1:1996 +A2:1998	01/07/2007
49	IEC 62054-11:2004		2004	Electronic ripple control receivers
50	EN 62054-21:2004	Electricity metering (a.c.) - Tariff and load control - Part 21: Particular requirements for time switches	2004	Time switches	EN 61038:1992 +A1:1996 +A2:1998	01/07/2007
50	IEC 62054-21:2004		2004	Time switches
51	EN 62053-23:2003	Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3)	2003	Static meters for reactive energy (classes 2 and 3)	EN 61268:1996	01/03/2006
51	IEC 62053-23:2003		2003	Static meters for reactive energy (classes 2 and 3)
52	EN 61326-1:2006	Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements	2006	Electrical equipment for measurement, control and laboratory use	EN 61326:1997 + A1:1998 + A2:2001 + A3:2003	01/02/2009
	IEC 61326-1:2005		15/12/2005		IEC 61326:2002	15/12/2007
	IEC 61326-1 Ed 2.0		10/07/2012		IEC 61326-1:2005	10/07/2014
53	EN 61543:1995 /A2:2006	Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility		Residual current-operated protective devices (RCDs) for household and similar use	EN 61543:1995 + A11:2003 + A12:2005 + COR:1997 + COR:2004	01/12/2008
53	IEC 61543:1995 + A1 (2004) + A2 (2005)		1995
54	EN 61800-3:2004	Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods	2004	Adjustable speed electrical power drive systems	EN 61800-3:1996 +A11:2000	01/10/2007	EN 61800-3:2004 will expire 19/12/2014
	EN 61800-3:2004 /A1:2012				EN 61800-3:2004	19/12/2014
	IEC 61800-3:2004		12/08/2004
55	EN 61812-1:1996 /A11:1999	Specified time relays for industrial use - Part 1: Requirements and tests		Specified time relays for industrial use	EN 61812-1:1996 +AC:1999	01/01/2002	EN 61812-1:1996/A11:1999 will expire 29/06/2014
	EN 61812-1:2011				EN 61812-1:1996 and its amendment	29/06/2014
	IEC 61812-1:1996		1996
56	EN 300 386 v1.5.1	Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; Electromagnetic Compatibility (EMC) requirements	2011	Telecommunication network equipment	EN 300 386 v1.4.1	31/01/2014	EN 300 386 v1.5.1 will expire 30/11/2015
56	EN 300 386 v1.6.1			Telecommunication network equipment	EN 300 386 v1.5.1	30/11/2015	EN 300 386 v1.5.1 will expire 30/11/2015
57	ISO 13766:2006	Earthmoving Machinery –Electromagnetic compatibility	2006	Agricultural and forestry machinery
58	ISO 14982:1998	Agricultural and forestry machinery – Electromagnetic compatibility – Test methods and acceptance criteria	1998	Agricultural and forestry machinery